# platform = Red Hat Virtualization 4,multi_platform_debian,multi_platform_fedora,multi_platform_ol,multi_platform_rhel,multi_platform_sle,multi_platform_slmicro,multi_platform_ubuntu,multi_platform_almalinux
# Remediation is applicable only in certain platforms
if dpkg-query --show --showformat='${db:Status-Status}' 'auditd' 2>/dev/null | grep -q '^installed$' && dpkg-query --show --showformat='${db:Status-Status}' 'linux-base' 2>/dev/null | grep -q '^installed$'; then

# First perform the remediation of the syscall rule
# Retrieve hardware architecture of the underlying system
[ "$(getconf LONG_BIT)" = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in "${RULE_ARCHS[@]}"
do
	ACTION_ARCH_FILTERS="-a always,exit -F arch=$ARCH"
	OTHER_FILTERS=""
	AUID_FILTERS=""
	SYSCALL="sethostname setdomainname"
	KEY="audit_rules_networkconfig_modification"
	SYSCALL_GROUPING="sethostname setdomainname"
	# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()

# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0600 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod 0600 ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod 0600 ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
done

# Then perform the remediations for the watch rules
# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
# Tool used to load audit rules	| Rule already defined	|  Audit rules file to inspect	  |
# -----------------------------------------------------------------------------------------
#	auditctl		|     Doesn't matter	|  /etc/audit/audit.rules	  |
# -----------------------------------------------------------------------------------------
# 	augenrules		|          Yes		|  /etc/audit/rules.d/*.rules	  |
# 	augenrules		|          No		|  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
files_to_inspect=()


# If the audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# into the list of files to be inspected
files_to_inspect+=('/etc/audit/audit.rules')

# Finally perform the inspection and possible subsequent audit rule
# correction for each of the files previously identified for inspection
for audit_rules_file in "${files_to_inspect[@]}"
do
    # Check if audit watch file system object rule for given path already present

    if grep -q -P -- "^[\s]*-w[\s]+/etc/issue" "$audit_rules_file"

    then
        # Rule is found => verify yet if existing rule definition contains
        # all of the required access type bits

        # Define BRE whitespace class shortcut
        sp="[[:space:]]"
        # Extract current permission access types (e.g. -p [r|w|x|a] values) from audit rule

        current_access_bits=$(sed -ne "s#$sp*-w$sp\+/etc/issue $sp\+-p$sp\+\([rxwa]\{1,4\}\).*#\1#p" "$audit_rules_file")

        # Split required access bits string into characters array
        # (to check bit's presence for one bit at a time)
        for access_bit in $(echo "wa" | grep -o .)
        do
            # For each from the required access bits (e.g. 'w', 'a') check
            # if they are already present in current access bits for rule.
            # If not, append that bit at the end
            if ! grep -q "$access_bit" <<< "$current_access_bits"
            then
                # Concatenate the existing mask with the missing bit
                current_access_bits="$current_access_bits$access_bit"
            fi
        done
        # Propagate the updated rule's access bits (original + the required
        # ones) back into the /etc/audit/audit.rules file for that rule

        sed -i "s#\($sp*-w$sp\+/etc/issue$sp\+-p$sp\+\)\([rxwa]\{1,4\}\)\(.*\)#\1$current_access_bits\3#" "$audit_rules_file"

    else
        # Rule isn't present yet. Append it at the end of $audit_rules_file file
        # with proper key


        echo "-w /etc/issue -p wa -k audit_rules_networkconfig_modification" >> "$audit_rules_file"

    fi
done
# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
# Tool used to load audit rules	| Rule already defined	|  Audit rules file to inspect	  |
# -----------------------------------------------------------------------------------------
#	auditctl		|     Doesn't matter	|  /etc/audit/audit.rules	  |
# -----------------------------------------------------------------------------------------
# 	augenrules		|          Yes		|  /etc/audit/rules.d/*.rules	  |
# 	augenrules		|          No		|  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
files_to_inspect=()

# If the audit is 'augenrules', then check if rule is already defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to list of files for inspection.
# If rule isn't defined, add '/etc/audit/rules.d/audit_rules_networkconfig_modification.rules' to list of files for inspection.

readarray -t matches < <(grep -HP "[\s]*-w[\s]+/etc/issue" /etc/audit/rules.d/*.rules)


# For each of the matched entries
for match in "${matches[@]}"
do
    # Extract filepath from the match
    rulesd_audit_file=$(echo $match | cut -f1 -d ':')
    # Append that path into list of files for inspection
    files_to_inspect+=("$rulesd_audit_file")
done
# Case when particular audit rule isn't defined yet
if [ "${#files_to_inspect[@]}" -eq "0" ]
then
    # Append '/etc/audit/rules.d/audit_rules_networkconfig_modification.rules' into list of files for inspection
    key_rule_file="/etc/audit/rules.d/audit_rules_networkconfig_modification.rules"
    # If the audit_rules_networkconfig_modification.rules file doesn't exist yet, create it with correct permissions
    if [ ! -e "$key_rule_file" ]
    then
        touch "$key_rule_file"
        chmod 0600 "$key_rule_file"
    fi
    files_to_inspect+=("$key_rule_file")
fi

# Finally perform the inspection and possible subsequent audit rule
# correction for each of the files previously identified for inspection
for audit_rules_file in "${files_to_inspect[@]}"
do
    # Check if audit watch file system object rule for given path already present

    if grep -q -P -- "^[\s]*-w[\s]+/etc/issue" "$audit_rules_file"

    then
        # Rule is found => verify yet if existing rule definition contains
        # all of the required access type bits

        # Define BRE whitespace class shortcut
        sp="[[:space:]]"
        # Extract current permission access types (e.g. -p [r|w|x|a] values) from audit rule

        current_access_bits=$(sed -ne "s#$sp*-w$sp\+/etc/issue $sp\+-p$sp\+\([rxwa]\{1,4\}\).*#\1#p" "$audit_rules_file")

        # Split required access bits string into characters array
        # (to check bit's presence for one bit at a time)
        for access_bit in $(echo "wa" | grep -o .)
        do
            # For each from the required access bits (e.g. 'w', 'a') check
            # if they are already present in current access bits for rule.
            # If not, append that bit at the end
            if ! grep -q "$access_bit" <<< "$current_access_bits"
            then
                # Concatenate the existing mask with the missing bit
                current_access_bits="$current_access_bits$access_bit"
            fi
        done
        # Propagate the updated rule's access bits (original + the required
        # ones) back into the /etc/audit/audit.rules file for that rule

        sed -i "s#\($sp*-w$sp\+/etc/issue$sp\+-p$sp\+\)\([rxwa]\{1,4\}\)\(.*\)#\1$current_access_bits\3#" "$audit_rules_file"

    else
        # Rule isn't present yet. Append it at the end of $audit_rules_file file
        # with proper key


        echo "-w /etc/issue -p wa -k audit_rules_networkconfig_modification" >> "$audit_rules_file"

    fi
done
# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
# Tool used to load audit rules	| Rule already defined	|  Audit rules file to inspect	  |
# -----------------------------------------------------------------------------------------
#	auditctl		|     Doesn't matter	|  /etc/audit/audit.rules	  |
# -----------------------------------------------------------------------------------------
# 	augenrules		|          Yes		|  /etc/audit/rules.d/*.rules	  |
# 	augenrules		|          No		|  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
files_to_inspect=()


# If the audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# into the list of files to be inspected
files_to_inspect+=('/etc/audit/audit.rules')

# Finally perform the inspection and possible subsequent audit rule
# correction for each of the files previously identified for inspection
for audit_rules_file in "${files_to_inspect[@]}"
do
    # Check if audit watch file system object rule for given path already present

    if grep -q -P -- "^[\s]*-w[\s]+/etc/issue.net" "$audit_rules_file"

    then
        # Rule is found => verify yet if existing rule definition contains
        # all of the required access type bits

        # Define BRE whitespace class shortcut
        sp="[[:space:]]"
        # Extract current permission access types (e.g. -p [r|w|x|a] values) from audit rule

        current_access_bits=$(sed -ne "s#$sp*-w$sp\+/etc/issue.net $sp\+-p$sp\+\([rxwa]\{1,4\}\).*#\1#p" "$audit_rules_file")

        # Split required access bits string into characters array
        # (to check bit's presence for one bit at a time)
        for access_bit in $(echo "wa" | grep -o .)
        do
            # For each from the required access bits (e.g. 'w', 'a') check
            # if they are already present in current access bits for rule.
            # If not, append that bit at the end
            if ! grep -q "$access_bit" <<< "$current_access_bits"
            then
                # Concatenate the existing mask with the missing bit
                current_access_bits="$current_access_bits$access_bit"
            fi
        done
        # Propagate the updated rule's access bits (original + the required
        # ones) back into the /etc/audit/audit.rules file for that rule

        sed -i "s#\($sp*-w$sp\+/etc/issue.net$sp\+-p$sp\+\)\([rxwa]\{1,4\}\)\(.*\)#\1$current_access_bits\3#" "$audit_rules_file"

    else
        # Rule isn't present yet. Append it at the end of $audit_rules_file file
        # with proper key


        echo "-w /etc/issue.net -p wa -k audit_rules_networkconfig_modification" >> "$audit_rules_file"

    fi
done
# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
# Tool used to load audit rules	| Rule already defined	|  Audit rules file to inspect	  |
# -----------------------------------------------------------------------------------------
#	auditctl		|     Doesn't matter	|  /etc/audit/audit.rules	  |
# -----------------------------------------------------------------------------------------
# 	augenrules		|          Yes		|  /etc/audit/rules.d/*.rules	  |
# 	augenrules		|          No		|  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
files_to_inspect=()

# If the audit is 'augenrules', then check if rule is already defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to list of files for inspection.
# If rule isn't defined, add '/etc/audit/rules.d/audit_rules_networkconfig_modification.rules' to list of files for inspection.

readarray -t matches < <(grep -HP "[\s]*-w[\s]+/etc/issue.net" /etc/audit/rules.d/*.rules)


# For each of the matched entries
for match in "${matches[@]}"
do
    # Extract filepath from the match
    rulesd_audit_file=$(echo $match | cut -f1 -d ':')
    # Append that path into list of files for inspection
    files_to_inspect+=("$rulesd_audit_file")
done
# Case when particular audit rule isn't defined yet
if [ "${#files_to_inspect[@]}" -eq "0" ]
then
    # Append '/etc/audit/rules.d/audit_rules_networkconfig_modification.rules' into list of files for inspection
    key_rule_file="/etc/audit/rules.d/audit_rules_networkconfig_modification.rules"
    # If the audit_rules_networkconfig_modification.rules file doesn't exist yet, create it with correct permissions
    if [ ! -e "$key_rule_file" ]
    then
        touch "$key_rule_file"
        chmod 0600 "$key_rule_file"
    fi
    files_to_inspect+=("$key_rule_file")
fi

# Finally perform the inspection and possible subsequent audit rule
# correction for each of the files previously identified for inspection
for audit_rules_file in "${files_to_inspect[@]}"
do
    # Check if audit watch file system object rule for given path already present

    if grep -q -P -- "^[\s]*-w[\s]+/etc/issue.net" "$audit_rules_file"

    then
        # Rule is found => verify yet if existing rule definition contains
        # all of the required access type bits

        # Define BRE whitespace class shortcut
        sp="[[:space:]]"
        # Extract current permission access types (e.g. -p [r|w|x|a] values) from audit rule

        current_access_bits=$(sed -ne "s#$sp*-w$sp\+/etc/issue.net $sp\+-p$sp\+\([rxwa]\{1,4\}\).*#\1#p" "$audit_rules_file")

        # Split required access bits string into characters array
        # (to check bit's presence for one bit at a time)
        for access_bit in $(echo "wa" | grep -o .)
        do
            # For each from the required access bits (e.g. 'w', 'a') check
            # if they are already present in current access bits for rule.
            # If not, append that bit at the end
            if ! grep -q "$access_bit" <<< "$current_access_bits"
            then
                # Concatenate the existing mask with the missing bit
                current_access_bits="$current_access_bits$access_bit"
            fi
        done
        # Propagate the updated rule's access bits (original + the required
        # ones) back into the /etc/audit/audit.rules file for that rule

        sed -i "s#\($sp*-w$sp\+/etc/issue.net$sp\+-p$sp\+\)\([rxwa]\{1,4\}\)\(.*\)#\1$current_access_bits\3#" "$audit_rules_file"

    else
        # Rule isn't present yet. Append it at the end of $audit_rules_file file
        # with proper key


        echo "-w /etc/issue.net -p wa -k audit_rules_networkconfig_modification" >> "$audit_rules_file"

    fi
done
# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
# Tool used to load audit rules	| Rule already defined	|  Audit rules file to inspect	  |
# -----------------------------------------------------------------------------------------
#	auditctl		|     Doesn't matter	|  /etc/audit/audit.rules	  |
# -----------------------------------------------------------------------------------------
# 	augenrules		|          Yes		|  /etc/audit/rules.d/*.rules	  |
# 	augenrules		|          No		|  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
files_to_inspect=()


# If the audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# into the list of files to be inspected
files_to_inspect+=('/etc/audit/audit.rules')

# Finally perform the inspection and possible subsequent audit rule
# correction for each of the files previously identified for inspection
for audit_rules_file in "${files_to_inspect[@]}"
do
    # Check if audit watch file system object rule for given path already present

    if grep -q -P -- "^[\s]*-w[\s]+/etc/hosts" "$audit_rules_file"

    then
        # Rule is found => verify yet if existing rule definition contains
        # all of the required access type bits

        # Define BRE whitespace class shortcut
        sp="[[:space:]]"
        # Extract current permission access types (e.g. -p [r|w|x|a] values) from audit rule

        current_access_bits=$(sed -ne "s#$sp*-w$sp\+/etc/hosts $sp\+-p$sp\+\([rxwa]\{1,4\}\).*#\1#p" "$audit_rules_file")

        # Split required access bits string into characters array
        # (to check bit's presence for one bit at a time)
        for access_bit in $(echo "wa" | grep -o .)
        do
            # For each from the required access bits (e.g. 'w', 'a') check
            # if they are already present in current access bits for rule.
            # If not, append that bit at the end
            if ! grep -q "$access_bit" <<< "$current_access_bits"
            then
                # Concatenate the existing mask with the missing bit
                current_access_bits="$current_access_bits$access_bit"
            fi
        done
        # Propagate the updated rule's access bits (original + the required
        # ones) back into the /etc/audit/audit.rules file for that rule

        sed -i "s#\($sp*-w$sp\+/etc/hosts$sp\+-p$sp\+\)\([rxwa]\{1,4\}\)\(.*\)#\1$current_access_bits\3#" "$audit_rules_file"

    else
        # Rule isn't present yet. Append it at the end of $audit_rules_file file
        # with proper key


        echo "-w /etc/hosts -p wa -k audit_rules_networkconfig_modification" >> "$audit_rules_file"

    fi
done
# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
# Tool used to load audit rules	| Rule already defined	|  Audit rules file to inspect	  |
# -----------------------------------------------------------------------------------------
#	auditctl		|     Doesn't matter	|  /etc/audit/audit.rules	  |
# -----------------------------------------------------------------------------------------
# 	augenrules		|          Yes		|  /etc/audit/rules.d/*.rules	  |
# 	augenrules		|          No		|  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
files_to_inspect=()

# If the audit is 'augenrules', then check if rule is already defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to list of files for inspection.
# If rule isn't defined, add '/etc/audit/rules.d/audit_rules_networkconfig_modification.rules' to list of files for inspection.

readarray -t matches < <(grep -HP "[\s]*-w[\s]+/etc/hosts" /etc/audit/rules.d/*.rules)


# For each of the matched entries
for match in "${matches[@]}"
do
    # Extract filepath from the match
    rulesd_audit_file=$(echo $match | cut -f1 -d ':')
    # Append that path into list of files for inspection
    files_to_inspect+=("$rulesd_audit_file")
done
# Case when particular audit rule isn't defined yet
if [ "${#files_to_inspect[@]}" -eq "0" ]
then
    # Append '/etc/audit/rules.d/audit_rules_networkconfig_modification.rules' into list of files for inspection
    key_rule_file="/etc/audit/rules.d/audit_rules_networkconfig_modification.rules"
    # If the audit_rules_networkconfig_modification.rules file doesn't exist yet, create it with correct permissions
    if [ ! -e "$key_rule_file" ]
    then
        touch "$key_rule_file"
        chmod 0600 "$key_rule_file"
    fi
    files_to_inspect+=("$key_rule_file")
fi

# Finally perform the inspection and possible subsequent audit rule
# correction for each of the files previously identified for inspection
for audit_rules_file in "${files_to_inspect[@]}"
do
    # Check if audit watch file system object rule for given path already present

    if grep -q -P -- "^[\s]*-w[\s]+/etc/hosts" "$audit_rules_file"

    then
        # Rule is found => verify yet if existing rule definition contains
        # all of the required access type bits

        # Define BRE whitespace class shortcut
        sp="[[:space:]]"
        # Extract current permission access types (e.g. -p [r|w|x|a] values) from audit rule

        current_access_bits=$(sed -ne "s#$sp*-w$sp\+/etc/hosts $sp\+-p$sp\+\([rxwa]\{1,4\}\).*#\1#p" "$audit_rules_file")

        # Split required access bits string into characters array
        # (to check bit's presence for one bit at a time)
        for access_bit in $(echo "wa" | grep -o .)
        do
            # For each from the required access bits (e.g. 'w', 'a') check
            # if they are already present in current access bits for rule.
            # If not, append that bit at the end
            if ! grep -q "$access_bit" <<< "$current_access_bits"
            then
                # Concatenate the existing mask with the missing bit
                current_access_bits="$current_access_bits$access_bit"
            fi
        done
        # Propagate the updated rule's access bits (original + the required
        # ones) back into the /etc/audit/audit.rules file for that rule

        sed -i "s#\($sp*-w$sp\+/etc/hosts$sp\+-p$sp\+\)\([rxwa]\{1,4\}\)\(.*\)#\1$current_access_bits\3#" "$audit_rules_file"

    else
        # Rule isn't present yet. Append it at the end of $audit_rules_file file
        # with proper key


        echo "-w /etc/hosts -p wa -k audit_rules_networkconfig_modification" >> "$audit_rules_file"

    fi
done

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
# Tool used to load audit rules	| Rule already defined	|  Audit rules file to inspect	  |
# -----------------------------------------------------------------------------------------
#	auditctl		|     Doesn't matter	|  /etc/audit/audit.rules	  |
# -----------------------------------------------------------------------------------------
# 	augenrules		|          Yes		|  /etc/audit/rules.d/*.rules	  |
# 	augenrules		|          No		|  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
files_to_inspect=()


# If the audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# into the list of files to be inspected
files_to_inspect+=('/etc/audit/audit.rules')

# Finally perform the inspection and possible subsequent audit rule
# correction for each of the files previously identified for inspection
for audit_rules_file in "${files_to_inspect[@]}"
do
    # Check if audit watch file system object rule for given path already present

    if grep -q -P -- "^[\s]*-w[\s]+/etc/networks" "$audit_rules_file"

    then
        # Rule is found => verify yet if existing rule definition contains
        # all of the required access type bits

        # Define BRE whitespace class shortcut
        sp="[[:space:]]"
        # Extract current permission access types (e.g. -p [r|w|x|a] values) from audit rule

        current_access_bits=$(sed -ne "s#$sp*-w$sp\+/etc/networks $sp\+-p$sp\+\([rxwa]\{1,4\}\).*#\1#p" "$audit_rules_file")

        # Split required access bits string into characters array
        # (to check bit's presence for one bit at a time)
        for access_bit in $(echo "wa" | grep -o .)
        do
            # For each from the required access bits (e.g. 'w', 'a') check
            # if they are already present in current access bits for rule.
            # If not, append that bit at the end
            if ! grep -q "$access_bit" <<< "$current_access_bits"
            then
                # Concatenate the existing mask with the missing bit
                current_access_bits="$current_access_bits$access_bit"
            fi
        done
        # Propagate the updated rule's access bits (original + the required
        # ones) back into the /etc/audit/audit.rules file for that rule

        sed -i "s#\($sp*-w$sp\+/etc/networks$sp\+-p$sp\+\)\([rxwa]\{1,4\}\)\(.*\)#\1$current_access_bits\3#" "$audit_rules_file"

    else
        # Rule isn't present yet. Append it at the end of $audit_rules_file file
        # with proper key


        echo "-w /etc/networks -p wa -k audit_rules_networkconfig_modification" >> "$audit_rules_file"

    fi
done
# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
# Tool used to load audit rules	| Rule already defined	|  Audit rules file to inspect	  |
# -----------------------------------------------------------------------------------------
#	auditctl		|     Doesn't matter	|  /etc/audit/audit.rules	  |
# -----------------------------------------------------------------------------------------
# 	augenrules		|          Yes		|  /etc/audit/rules.d/*.rules	  |
# 	augenrules		|          No		|  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
files_to_inspect=()

# If the audit is 'augenrules', then check if rule is already defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to list of files for inspection.
# If rule isn't defined, add '/etc/audit/rules.d/audit_rules_networkconfig_modification.rules' to list of files for inspection.

readarray -t matches < <(grep -HP "[\s]*-w[\s]+/etc/networks" /etc/audit/rules.d/*.rules)


# For each of the matched entries
for match in "${matches[@]}"
do
    # Extract filepath from the match
    rulesd_audit_file=$(echo $match | cut -f1 -d ':')
    # Append that path into list of files for inspection
    files_to_inspect+=("$rulesd_audit_file")
done
# Case when particular audit rule isn't defined yet
if [ "${#files_to_inspect[@]}" -eq "0" ]
then
    # Append '/etc/audit/rules.d/audit_rules_networkconfig_modification.rules' into list of files for inspection
    key_rule_file="/etc/audit/rules.d/audit_rules_networkconfig_modification.rules"
    # If the audit_rules_networkconfig_modification.rules file doesn't exist yet, create it with correct permissions
    if [ ! -e "$key_rule_file" ]
    then
        touch "$key_rule_file"
        chmod 0600 "$key_rule_file"
    fi
    files_to_inspect+=("$key_rule_file")
fi

# Finally perform the inspection and possible subsequent audit rule
# correction for each of the files previously identified for inspection
for audit_rules_file in "${files_to_inspect[@]}"
do
    # Check if audit watch file system object rule for given path already present

    if grep -q -P -- "^[\s]*-w[\s]+/etc/networks" "$audit_rules_file"

    then
        # Rule is found => verify yet if existing rule definition contains
        # all of the required access type bits

        # Define BRE whitespace class shortcut
        sp="[[:space:]]"
        # Extract current permission access types (e.g. -p [r|w|x|a] values) from audit rule

        current_access_bits=$(sed -ne "s#$sp*-w$sp\+/etc/networks $sp\+-p$sp\+\([rxwa]\{1,4\}\).*#\1#p" "$audit_rules_file")

        # Split required access bits string into characters array
        # (to check bit's presence for one bit at a time)
        for access_bit in $(echo "wa" | grep -o .)
        do
            # For each from the required access bits (e.g. 'w', 'a') check
            # if they are already present in current access bits for rule.
            # If not, append that bit at the end
            if ! grep -q "$access_bit" <<< "$current_access_bits"
            then
                # Concatenate the existing mask with the missing bit
                current_access_bits="$current_access_bits$access_bit"
            fi
        done
        # Propagate the updated rule's access bits (original + the required
        # ones) back into the /etc/audit/audit.rules file for that rule

        sed -i "s#\($sp*-w$sp\+/etc/networks$sp\+-p$sp\+\)\([rxwa]\{1,4\}\)\(.*\)#\1$current_access_bits\3#" "$audit_rules_file"

    else
        # Rule isn't present yet. Append it at the end of $audit_rules_file file
        # with proper key


        echo "-w /etc/networks -p wa -k audit_rules_networkconfig_modification" >> "$audit_rules_file"

    fi
done
# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
# Tool used to load audit rules	| Rule already defined	|  Audit rules file to inspect	  |
# -----------------------------------------------------------------------------------------
#	auditctl		|     Doesn't matter	|  /etc/audit/audit.rules	  |
# -----------------------------------------------------------------------------------------
# 	augenrules		|          Yes		|  /etc/audit/rules.d/*.rules	  |
# 	augenrules		|          No		|  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
files_to_inspect=()


# If the audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# into the list of files to be inspected
files_to_inspect+=('/etc/audit/audit.rules')

# Finally perform the inspection and possible subsequent audit rule
# correction for each of the files previously identified for inspection
for audit_rules_file in "${files_to_inspect[@]}"
do
    # Check if audit watch file system object rule for given path already present

    if grep -q -P -- "^[\s]*-w[\s]+/etc/network/" "$audit_rules_file"

    then
        # Rule is found => verify yet if existing rule definition contains
        # all of the required access type bits

        # Define BRE whitespace class shortcut
        sp="[[:space:]]"
        # Extract current permission access types (e.g. -p [r|w|x|a] values) from audit rule

        current_access_bits=$(sed -ne "s#$sp*-w$sp\+/etc/network/ $sp\+-p$sp\+\([rxwa]\{1,4\}\).*#\1#p" "$audit_rules_file")

        # Split required access bits string into characters array
        # (to check bit's presence for one bit at a time)
        for access_bit in $(echo "wa" | grep -o .)
        do
            # For each from the required access bits (e.g. 'w', 'a') check
            # if they are already present in current access bits for rule.
            # If not, append that bit at the end
            if ! grep -q "$access_bit" <<< "$current_access_bits"
            then
                # Concatenate the existing mask with the missing bit
                current_access_bits="$current_access_bits$access_bit"
            fi
        done
        # Propagate the updated rule's access bits (original + the required
        # ones) back into the /etc/audit/audit.rules file for that rule

        sed -i "s#\($sp*-w$sp\+/etc/network/$sp\+-p$sp\+\)\([rxwa]\{1,4\}\)\(.*\)#\1$current_access_bits\3#" "$audit_rules_file"

    else
        # Rule isn't present yet. Append it at the end of $audit_rules_file file
        # with proper key


        echo "-w /etc/network/ -p wa -k audit_rules_networkconfig_modification" >> "$audit_rules_file"

    fi
done
# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
# Tool used to load audit rules	| Rule already defined	|  Audit rules file to inspect	  |
# -----------------------------------------------------------------------------------------
#	auditctl		|     Doesn't matter	|  /etc/audit/audit.rules	  |
# -----------------------------------------------------------------------------------------
# 	augenrules		|          Yes		|  /etc/audit/rules.d/*.rules	  |
# 	augenrules		|          No		|  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
files_to_inspect=()

# If the audit is 'augenrules', then check if rule is already defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to list of files for inspection.
# If rule isn't defined, add '/etc/audit/rules.d/audit_rules_networkconfig_modification.rules' to list of files for inspection.

readarray -t matches < <(grep -HP "[\s]*-w[\s]+/etc/network/" /etc/audit/rules.d/*.rules)


# For each of the matched entries
for match in "${matches[@]}"
do
    # Extract filepath from the match
    rulesd_audit_file=$(echo $match | cut -f1 -d ':')
    # Append that path into list of files for inspection
    files_to_inspect+=("$rulesd_audit_file")
done
# Case when particular audit rule isn't defined yet
if [ "${#files_to_inspect[@]}" -eq "0" ]
then
    # Append '/etc/audit/rules.d/audit_rules_networkconfig_modification.rules' into list of files for inspection
    key_rule_file="/etc/audit/rules.d/audit_rules_networkconfig_modification.rules"
    # If the audit_rules_networkconfig_modification.rules file doesn't exist yet, create it with correct permissions
    if [ ! -e "$key_rule_file" ]
    then
        touch "$key_rule_file"
        chmod 0600 "$key_rule_file"
    fi
    files_to_inspect+=("$key_rule_file")
fi

# Finally perform the inspection and possible subsequent audit rule
# correction for each of the files previously identified for inspection
for audit_rules_file in "${files_to_inspect[@]}"
do
    # Check if audit watch file system object rule for given path already present

    if grep -q -P -- "^[\s]*-w[\s]+/etc/network/" "$audit_rules_file"

    then
        # Rule is found => verify yet if existing rule definition contains
        # all of the required access type bits

        # Define BRE whitespace class shortcut
        sp="[[:space:]]"
        # Extract current permission access types (e.g. -p [r|w|x|a] values) from audit rule

        current_access_bits=$(sed -ne "s#$sp*-w$sp\+/etc/network/ $sp\+-p$sp\+\([rxwa]\{1,4\}\).*#\1#p" "$audit_rules_file")

        # Split required access bits string into characters array
        # (to check bit's presence for one bit at a time)
        for access_bit in $(echo "wa" | grep -o .)
        do
            # For each from the required access bits (e.g. 'w', 'a') check
            # if they are already present in current access bits for rule.
            # If not, append that bit at the end
            if ! grep -q "$access_bit" <<< "$current_access_bits"
            then
                # Concatenate the existing mask with the missing bit
                current_access_bits="$current_access_bits$access_bit"
            fi
        done
        # Propagate the updated rule's access bits (original + the required
        # ones) back into the /etc/audit/audit.rules file for that rule

        sed -i "s#\($sp*-w$sp\+/etc/network/$sp\+-p$sp\+\)\([rxwa]\{1,4\}\)\(.*\)#\1$current_access_bits\3#" "$audit_rules_file"

    else
        # Rule isn't present yet. Append it at the end of $audit_rules_file file
        # with proper key


        echo "-w /etc/network/ -p wa -k audit_rules_networkconfig_modification" >> "$audit_rules_file"

    fi
done
# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
# Tool used to load audit rules	| Rule already defined	|  Audit rules file to inspect	  |
# -----------------------------------------------------------------------------------------
#	auditctl		|     Doesn't matter	|  /etc/audit/audit.rules	  |
# -----------------------------------------------------------------------------------------
# 	augenrules		|          Yes		|  /etc/audit/rules.d/*.rules	  |
# 	augenrules		|          No		|  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
files_to_inspect=()


# If the audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# into the list of files to be inspected
files_to_inspect+=('/etc/audit/audit.rules')

# Finally perform the inspection and possible subsequent audit rule
# correction for each of the files previously identified for inspection
for audit_rules_file in "${files_to_inspect[@]}"
do
    # Check if audit watch file system object rule for given path already present

    if grep -q -P -- "^[\s]*-w[\s]+/etc/netplan/" "$audit_rules_file"

    then
        # Rule is found => verify yet if existing rule definition contains
        # all of the required access type bits

        # Define BRE whitespace class shortcut
        sp="[[:space:]]"
        # Extract current permission access types (e.g. -p [r|w|x|a] values) from audit rule

        current_access_bits=$(sed -ne "s#$sp*-w$sp\+/etc/netplan/ $sp\+-p$sp\+\([rxwa]\{1,4\}\).*#\1#p" "$audit_rules_file")

        # Split required access bits string into characters array
        # (to check bit's presence for one bit at a time)
        for access_bit in $(echo "wa" | grep -o .)
        do
            # For each from the required access bits (e.g. 'w', 'a') check
            # if they are already present in current access bits for rule.
            # If not, append that bit at the end
            if ! grep -q "$access_bit" <<< "$current_access_bits"
            then
                # Concatenate the existing mask with the missing bit
                current_access_bits="$current_access_bits$access_bit"
            fi
        done
        # Propagate the updated rule's access bits (original + the required
        # ones) back into the /etc/audit/audit.rules file for that rule

        sed -i "s#\($sp*-w$sp\+/etc/netplan/$sp\+-p$sp\+\)\([rxwa]\{1,4\}\)\(.*\)#\1$current_access_bits\3#" "$audit_rules_file"

    else
        # Rule isn't present yet. Append it at the end of $audit_rules_file file
        # with proper key


        echo "-w /etc/netplan/ -p wa -k audit_rules_networkconfig_modification" >> "$audit_rules_file"

    fi
done
# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
# Tool used to load audit rules	| Rule already defined	|  Audit rules file to inspect	  |
# -----------------------------------------------------------------------------------------
#	auditctl		|     Doesn't matter	|  /etc/audit/audit.rules	  |
# -----------------------------------------------------------------------------------------
# 	augenrules		|          Yes		|  /etc/audit/rules.d/*.rules	  |
# 	augenrules		|          No		|  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
files_to_inspect=()

# If the audit is 'augenrules', then check if rule is already defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to list of files for inspection.
# If rule isn't defined, add '/etc/audit/rules.d/audit_rules_networkconfig_modification.rules' to list of files for inspection.

readarray -t matches < <(grep -HP "[\s]*-w[\s]+/etc/netplan/" /etc/audit/rules.d/*.rules)


# For each of the matched entries
for match in "${matches[@]}"
do
    # Extract filepath from the match
    rulesd_audit_file=$(echo $match | cut -f1 -d ':')
    # Append that path into list of files for inspection
    files_to_inspect+=("$rulesd_audit_file")
done
# Case when particular audit rule isn't defined yet
if [ "${#files_to_inspect[@]}" -eq "0" ]
then
    # Append '/etc/audit/rules.d/audit_rules_networkconfig_modification.rules' into list of files for inspection
    key_rule_file="/etc/audit/rules.d/audit_rules_networkconfig_modification.rules"
    # If the audit_rules_networkconfig_modification.rules file doesn't exist yet, create it with correct permissions
    if [ ! -e "$key_rule_file" ]
    then
        touch "$key_rule_file"
        chmod 0600 "$key_rule_file"
    fi
    files_to_inspect+=("$key_rule_file")
fi

# Finally perform the inspection and possible subsequent audit rule
# correction for each of the files previously identified for inspection
for audit_rules_file in "${files_to_inspect[@]}"
do
    # Check if audit watch file system object rule for given path already present

    if grep -q -P -- "^[\s]*-w[\s]+/etc/netplan/" "$audit_rules_file"

    then
        # Rule is found => verify yet if existing rule definition contains
        # all of the required access type bits

        # Define BRE whitespace class shortcut
        sp="[[:space:]]"
        # Extract current permission access types (e.g. -p [r|w|x|a] values) from audit rule

        current_access_bits=$(sed -ne "s#$sp*-w$sp\+/etc/netplan/ $sp\+-p$sp\+\([rxwa]\{1,4\}\).*#\1#p" "$audit_rules_file")

        # Split required access bits string into characters array
        # (to check bit's presence for one bit at a time)
        for access_bit in $(echo "wa" | grep -o .)
        do
            # For each from the required access bits (e.g. 'w', 'a') check
            # if they are already present in current access bits for rule.
            # If not, append that bit at the end
            if ! grep -q "$access_bit" <<< "$current_access_bits"
            then
                # Concatenate the existing mask with the missing bit
                current_access_bits="$current_access_bits$access_bit"
            fi
        done
        # Propagate the updated rule's access bits (original + the required
        # ones) back into the /etc/audit/audit.rules file for that rule

        sed -i "s#\($sp*-w$sp\+/etc/netplan/$sp\+-p$sp\+\)\([rxwa]\{1,4\}\)\(.*\)#\1$current_access_bits\3#" "$audit_rules_file"

    else
        # Rule isn't present yet. Append it at the end of $audit_rules_file file
        # with proper key


        echo "-w /etc/netplan/ -p wa -k audit_rules_networkconfig_modification" >> "$audit_rules_file"

    fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi